158 APIs from Department of Transport and Planning
158 API · Latest update 2026-09-30 · Source data.gov.au (2026-10-11)
158 matching entries from data.gov.au (Recently updated, as of 2026-10-11).
158 APIs from Department of Transport and Planning
Department of Transport and Planning · Updated 2026-09-30
Renewables facility centre points for Victoria. The locations are centre points of renewable facilities that form the following renewable energy classes 1. Solar 2. Wind 3. Waste to energy 4. Battery…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-30
This dataset contains polygon features representing overlay controls for all Victorian planning schemes. Overlays reflect specific characteristics of land in an area, such as areas of significant vege…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-30
This dataset contains line features representing a boundary which indicates the long-term limits of urban development in metropolitan Melbourne. It only affects 17 LGAs within the Melbourne metropolit…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-30
This dataset consists of an aspatial table that links the attribute "zone_num" with the full planning scheme descriptions. This layer is attributed with: - zone number - zone code - description - lege…
WFSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-30
The Heritage Inventory is a listing of all known historical (non-Indigenous) archaeological sites in Victoria. While there are approximately 7,000 sites listed on the Heritage Inventory, it is not a c…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-30
The Victorian Heritage Register lists the State's most significant heritage places and objects protected under the Heritage Act 2017.
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-30
Renewables properties for Victoria. The locations are polygons for the combined properties that form the following renewable energy classes 1. Solar 2. Wind 3. Waste to energy 4. Battery Useful links:…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
Part of the Vicmap Features of Interest Product Point/centroid location of undefined buildings across Victoria that are NOT contained within the following polygon datasets VMFEAT_BUILDING_POLYGON, VMF…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
Part of the Vicmap Admin dataset series. This dataset contains the Victorian Government Regional Departmental Boundaries as defined by Local Government Victoria, Dept. of Planning & Community Developm…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
This layer consists of polygons representing Victoria's land parcels. It does not include the aspatial details related to each polygon. It should therefore be used in conjuction with the other layers…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
Part of the Vicmap Features of Interest dataset Point/centroid location of ALL features of interest records within Victoria. It holds ALL features ONCE regardless of whether they were derived from a p…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
See the product metadata record VICMAP_ADDRESS (Vicmap Address) ANZVI0803002578 To access the data:- Vicmap Address is Victoria's authoritative geocoded database of property address points.
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
Annotation Text is a point layer belonging to Vicmap Property and consists of point data representing the location of Annotation and Text for Vicmap Property. The points have been attributed with the…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
NOTE: This layer is current up to August 2011. Part of the Vicmap Crown Land Tenure dataset series. This is a statewide dataset that plays a key role in the management of Victoria's Crown land. It has…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
This layer consists of polygons representing Victoria's properties. It does not include the aspatial details related to each polygon. It should therefore be used in conjunction with the other layers a…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
ADDRESS_MAIN is a dataset layer of Address2 is a variant of the ADDRESS product and splits address vertically to overcome the 2 Gigabyte DBASE limit when delivering address in a MapInfo or Shapefile f…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
Part of the Vicmap Crown Land Tenure dataset series. This is a statewide dataset that plays a key role in the management of Victoria's Crown land. It has been created (June 2003 - Feb 2004) from migra…
WFSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
ADDRESS_SUP is a dataset table of Address2 is a variant of the ADDRESS product and splits address vertically to overcome the 2 Gigabyte DBASE limit when delivering address in a MapInfo or Shapefile fo…
WFSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
This dataset provides information on every survey control mark in the Survey Mark Enquiry Service (SMES). SMES contains online information on survey marks in Victoria such as status, location, elevati…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
Part of the Vicmap Crown Land Tenure (Basic) dataset series. This dataset plays a key role in the management of Victoria's Crown land. It is was created (June 2003 - Feb 2004) from migrating LCMP laye…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
Part of the Vicmap Admin dataset series. This dataset contains the polygons for the authoritative Locality boundary dataset for Victoria. Locality Boundaries are as defined by Local Governments and re…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
Approved Parcel Map Polygons is a polygon layer belonging to Vicmap Property Simplified 2, a modified and simplified model of Vicmap Property, specifically generated for Local Government use.. It cons…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
Proposed Parcel Map Polygons is a polygon layer belonging to Vicmap Property Simplified 2, a modified and simplified model of Vicmap Property, specifically generated for Local Government use.. It cons…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
Part of the Vicmap Crown Land Tenure (Basic) dataset series. This dataset is a decoded version of Vicmap Crown Land Tenure. The model has been designed with simplicity of use in mind. Attributes have…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
Part of the Vicmap Crown Land Tenure (Basic) dataset series. This dataset is a decoded version of Vicmap Crown Land Tenure. The model has been designed with simplicity of use in mind. Attributes have…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
Proposed easements represented as lines in a layer belonging to Vicmap Property Simplified 2 product. Only a subset of easements have been captured. This layer should be used in conjuction with the ot…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
Part of the Vicmap Admin dataset series. Full topology. Polygon layer. attribution (postcode numbers, unique feature identification, data quality pointer etc) is available. These Boundaries are create…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
Property Base Approved a dataset from the product Vicmap Property Simplified 2, specifically generated for Local Government use..
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
Property Map Polygons is a polygon layer belonging to Vicmap Property Simplified, a modified and simplified model of Vicmap Property. It consists of polygons representing Victoria's land parcels. This…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
Cadastral Area Boundary is a line layer belonging to Vicmap Property and consists of data representing Victoria's land parcels and properties and is used extensively in Geographic Information Systems…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
Part of the Vicmap Features of Interest dataset Polygon extent of ALL features of interest records within Victoria. It holds ALL features ONCE regardless of whether they were derived from a point, lin…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
See Vicmap Property product for details.
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
Approved easements annotation text is a point layer belonging to Vicmap Property Simplified 2 product. Only a subset of easements have been captured. This layer should be used in conjuction with the o…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
This layer is part of Vicmap Transport and contains point features delineating road infrastructure features. Includes; Bridges, Tunnels, Gates, Cattle Grids, Barrirers, Level Crossings, Roundabouts &…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
Parcel Map Polygons is a polygon layer belonging to Vicmap Property Simplified, a modified and simplified model of Vicmap Property. It consists of polygons representing Victoria's land parcels. This l…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
Property Address is a denormalised Vicmap Property/Address dataset. It shows each property polygon with its associated property and address details. Where 2 or more property or address records are ass…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
Property Base Proposed a dataset from the product Vicmap Property Simplified 2, specifically generated for Local Government use..
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
Part of the Vicmap Admin dataset series. This dataset contains the polygons for the authoritative LGA boundary dataset. This dataset contains. Local Government Boundaries (LGA's). LGA's are as defined…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
Approved and proposed easements represented as lines in a layer belonging to Vicmap Property. Only a subset of easements have been captured. This layer should be used in conjuction with the other laye…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
Part of the VLAT dataset series. This dataset contains the polygons for the authoritative LGA boundary dataset. This dataset contains. Local Government Boundaries (LGA's). LGA's are as defined by Loca…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
This layer is part of Vicmap Transport and is and extensive digital road network - line features delineating state wide road network. Includes; Bridges, Connectors, Footbridge, Ferry Route, Foot Track…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
Part of the Vicmap Crown Land Tenure dataset series. This dataset plays a key role in the management of Victoria's Crown land. It is being created (June 2003 - Feb 2004) from migrating LCMP layers int…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
TR_ROAD_REGISTER forms the basis of the road register for Victoria. Road segements (TR_ROAD) are grouped by road name, road type, road suffix and locality using the TR_ROAD_LOCALITY_SECTION and TR_ROA…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
Part of Vicmap Property, PARCEL_PROPERTY is an Aspatial table.
WFSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
Property Primary Proposed dataset from the product Vicmap Property Simplified 2, specifically generated for Local Government use..
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
Property Primary Approved a dataset from the product Vicmap Property Simplified 2, specifically generated for Local Government use..
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
Proposed easements annotation text is a point layer belonging to Vicmap Property Simplified 2 product. Only a subset of easements have been captured. This layer should be used in conjuction with the o…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-27
Approved easements represented as lines in a layer belonging to Vicmap Property Simplified 2 product. Only a subset of easements have been captured. This layer should be used in conjuction with the ot…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-22
This dataset contains polygon features representing the balance of the municipality that is outside the Urban Growth Boundary (UGB). The UGB is a boundary that indicates the long-term limits of urban…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-22
This dataset contains polygon features representing land use zones (such as residential, industrial or rural) for all Victorian planning schemes. This layer is attributed with: - scheme code - zone nu…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-20
Part of the Vicmap Admin dataset series. Locality Boundaries Boundary polygons for Victoria. Locality Boundaries are as defined by The Registrar of Geographic Names. Aligned to Road Network - Vicmap T…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-20
This layer is part of Vicmap Hydro and contains polygon features delineating hydrological features. Includes; Lakes, Flats (subject to inundation), Wetlands, Pondages (saltpan & sewrage), Watercourse…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-20
Part of the Vicmap Admin dataset series. This dataset contains Local Government Boundaries (LGA's) polygons. LGA's are as defined by Dept. for Victorian Communities (DVC). Aligned to Road Network - Vi…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-20
Part of the Vicmap Features of Interest Product Polygon extent of larger buildings across Victoria.
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-20
Part of the Vicmap Admin dataset series. This dataset contains the Victorian Government Regional Departmental Boundaries as defined by Local Government Victoria, Dept. of Planning & Community Developm…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-14
Part of the Vicmap Admin dataset series. This layer contains line, and polygon features delineating gazetted Township boundaries and AT boundaries.
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-14
This layer is part of Vicmap Transport and contains line and point features delineating railway features. Includes; Railway Exits, Railway Yards, Railway Bridges, Railway Tunnels, Railways & Tramways.
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-14
This layer is part of Vicmap Transport and contains line and point features delineating railway features. Includes; Railway Stations, Rail Bridges, Tunnel-rail.
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-14
This layer is part of Vicmap Hydro and contains line features delineating hydrological features. Includes; Watercourses (ie channels, rivers & streams) & Connectors. Attributed for name. Arcs run down…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-11
This dataset contains polygons which cover the cities and major towns, and smaller developed areas. These polygons are not intended to represent "built up areas", nor do they define areas available fo…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-06
Part of the Vicmap Admin dataset series. This layer contains polygon features delineating parish boundaries as defined by CLM, Dept. of Sustainability & Environment.
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-09-06
This layer is part of Vicmap Hydro and contains point features delineating hydrological features. Includes; Rapids, Springs, Waterfalls & Water body points (dams). Attributed for name but necessarliy…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-30
This layer is part of Vicmap Transport and exists is a dataset containing point features delineating Helipads.
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-23
This table will hold polygons depicting indicative extents of the area of the relief feature. Each of these features has some type of non specific but best derived boundary. These geographic relief ar…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-16
This layer is part of Vicmap Hydro and contains lines delineating structural features relating to hydrography. Includes; Wharfs, Marinas, Offshore Platforms, Breakwates, Launching Ramps, Dam Walls, Sp…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-09
The table contains polygons depicting relief features including islands and island groups. These features may be named or unnamed and names linked to VICNAMES. Inland islands are derived from HY_WATER…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-06
The Urban Development Program (UDP) monitors and reports on major residential redevelopment projects across metropolitan Melbourne. Major redevelopment projects are those comprising ten or more dwelli…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-02
This dataset is used for the generation of Vicmap Topographic 1:100 000 map series. Vicmap Topographic 1:100 000 topographic maps are available internally as GeoPDFs at
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-02
This layer contains polygon features delineating local government area boundaries prior to the 1994 amalgamations. The dataset has been superseded with the new 1994 Local Government Area boundaries Al…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-02
This layer is part of Vicmap Elevation 10-20 Contours & Relief, a subset of Vicmap Elevation. It contains polygon features representing Includes. Rocky Outcrops, Sand & Surface Area void
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-02
1:25 000 Mapgrid of Australia Boundaries.
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-02
This layer is part of Vicmap Hydro and contains polygons delineating structural features relating to hydrography. Includes; Dam Batters & Spillways Also available in line/centroid layers.
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-02
This layer is part of Vicmap Elevation 10-20 Contours & Relief, a subset of Vicmap Elevation. It contains point features delineating ground surface points photogrammetric control points. Includes; Spo…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-02
Part of the Vicmap Admin dataset series. This dataset contains WARD Boundaries (WARDS) for all LGA's within Victoria, used for local government elections. The WARD_2016 data set of Victorian local gov…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-02
The Urban Development Program (UDP) -Industrial Land. Identifies all industrial land and the development status and size of each land parcel in hectares across metropolitan Melbourne. This information…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-02
This layer is part of Vicmap Lite and contains stylised polygon features from which key geographic areas can be labelled. Vicmap Lite datasets are suited for use between scales of 1: 250,000 and 1 : 5…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-02
This layer represents linework for the state boundary, zero contour, coastline and the data extent for Vicmap Elevation & Vicmap Features, Vicmap Hydro, Vicmap Transport.
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-02
This layer is part of Vicmap Hydro and contains point features delineating hydro/navigation features. Includes; Buoys, Beacons, Rocks & Wrecks.
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-02
This layer is part of Vicmap Lite and contains polygon features delineating forested areas. The polygons were sourced from TREE100. This version of the vmlite_forest dataset was created by merging the…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-01
1:50 000 Mapgrid of Australia Boundaries.
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-01
This layer provides an annual view of residential dwellings for Metropolitan Melbourne defined by the 31 local government areas. Dwelling information is assigned to polygons representing Victoria's la…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-01
This layer is part of Vicmap Hydro and contains line features delineating hydro/navigation features. Includes; Reefs & Ledges.
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-01
This layer is part of Vicmap Elevation 1-5 Contours & Relief, a subset of Vicmap Elevation. It contains point features delineating ground surface points photogrammetric control points. Data has been d…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-01
This layer is part of Vicmap Hydro and contains points delineating stuctural features relating to hydrography. Includes; Locks, Wells & Watering Places
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-01
This layer is part of Vicmap Lite and contains polygons representing the mainland, islands and the sea. The polygons were sourced from vmindex.fr_framework_area_polygon. The level of attribute informa…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-01
Public Transport Accessibility Level (PTAL) is a measure used in transport planning to assess how well a specific location is connected to the public transport network. The Car Parking Requirement Map…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-01
This layer is part of Vicmap Lite and contains polygon features delineating hydrological features. Vicmap Lite datasets are suited for use between scales of 1: 250,000 and 1 : 5 million. The polygons…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-01
The Urban Development Program (UDP) monitors and reports on major residential redevelopment projects across metropolitan Melbourne. Major redevelopment projects are those comprising ten or more dwelli…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-01
This layer is part of Vicmap Lite and contains lines representing the coast and the state border. The linework was sourced from vmindex.fr_framework_area_line. The level of attribute information, the…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-01
Polygon showing Melbourne's Metro Partnership Boundaries
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-01
This data is now obsolete, current UDP data is available. Identifies undeveloped land for residential development generally on the fringe of the metropolitan area. Each record in the database details…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-01
This layer is part of Vicmap Lite and contains point features delineating townships. Vicmap Lite datasets are suited for use between scales of 1: 250,000 and 1 : 5 million. The point features were sou…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-01
This layer is part of Vicmap Transport and exists is a dataset containing polygon features delineating airport areas. Includes; Airports When capturing the Airport data for the state, some data was ca…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-01
This layer is part of Vicmap Elevation 10-20 Contours & Relief, a subset of Vicmap Elevation. It contains point features delineating ground type points. Includes: Mountain, Rock Terrestial and Points.
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-01
1:30 000 format Mapgrid of Australia Mapsheet Boundaries as used for the A4 online topographic maps. Vicmap Topographic 1:30 000 Geo PDFs are available from
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-01
This layer is part of Vicmap Transport and contains line features delineating airport infrastructure features. Includes; Airports & Runways When capturing the Airport data for the state, some data was…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-01
Identifies undeveloped land for residential development generally on the fringe of the urban area. Each record in the database details the subdivision and planning status of the land, the area of the…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-01
Urban Development Program (UDP) - Greenfield Residential Land 2025 identifies undeveloped land for residential development generally on the fringe of the metropolitan area. Each record in the database…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-01
This layer is part of Vicmap Elevation 10-20 Contours & Relief, a subset of Vicmap Elevation. It contains line features delineating morphology and related features. Includes; Embankments, Cuttings, Sa…
WFS, WMSCreative Commons Attribution 3.0 Australia
Department of Transport and Planning · Updated 2026-08-01
Polygon features identify designated Bushfire Prone Areas where specific bushfire building construction requirements apply. The municipal areas of Melbourne, Yarra, Maribyrnong, Moonee Valley, Darebin…
WFS, WMSCreative Commons Attribution 3.0 Australia
Top 100 by the default sort. To see all 158, filter this list in the search
GovAPI Atlas is an index of the APIs and web services that national government open-data portals publish. This edition's list was read from data.gov.au on 2026-10-11 and is refreshed every week. GovAPI Atlas does not host the APIs; you apply for and call them on the portal itself.
What is included
Datasets on data.gov.au with at least one resource that is an API or web service (WMS, WFS, WCS, WMTS, ArcGIS REST, Esri REST, SPARQL, API). File-only datasets are left out.
Source
Source: data.gov.au. Material on data.gov.au is provided under a Creative Commons Attribution 3.0 Australia licence; each dataset lists its own licence.