44 APIs from Melbourne Water Open Data Hub
44 API · Latest update 2026-06-25 · Source data.gov.au (2026-10-11)
44 matching entries from data.gov.au (Recently updated, as of 2026-10-11).
44 APIs from Melbourne Water Open Data Hub
Melbourne Water Open Data Hub · Updated 2026-06-25
Western Treatment Plant (WTP) is a wastewater treatment facility. This layer contains the WTP carrier and mains and associated details. Includes sewer name, description, asset section (for As Construc…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
This dataset shows land parcels owned by Melbourne Water that have potential to be utilised for liveability related projects. The data does not provide a guarantee that the land can be used, or used b…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
Area representing the watershed catchment of a waterway or the hydraulic catchment of an underground stormwater drain for each Melbourne Water drain / catchment number. Captured using available contou…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
Daily point rainfall values. This data is collected with rainfall telemetry devices installed at the catchment storage dams, and verified with field observations daily. This data provides daily rainfa…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
Data represents vegetation coverage within the riparian zone for waterways across Melbourne Water’s region. This layer was developed by GraceGIS as part of vegetation statistics extraction for each ri…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
This data provides daily accumulated inflow volumes for wastewater treatment at the two Melbourne Water site (Western and Eastern). This data is collected using network flow monitoring devices. This d…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
This dataset provides daily measured streamflows into the four (4) major harvesting catchment dams in megalitres (ML). The streamflow is a calculated value which represents the observed 24-hour accumu…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
Layer containing polygons that denote the location and extent of parcels of land that are owned by Melbourne Water. This layer is intended to be used to identify Melbourne Water owned land and respons…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
Eastern Treatment Plant (ETP) is a wastewater treatment facility. Non-potable water, known as 4W, is generated and used onsite. This layer contains the 4W Effluent pipeline centrelines and associated…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
Layer containing reclaimed water (recycled) mains and associated details. Includes description, asset section (for As Constructed drawings) and key attributes. Recycled water is supplied to Melbourne'…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
Layer containing water supply service reservoirs (location and extent). Service reservoirs are minor local storages. Information captured using as-constructed drawings and aerial imagery, and includes…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
This data provides daily accumulated water usage volumes supplied from the 10 Melbourne Water storages. This data is collected using more than 120 Flow Monitoring devices across Melbourne Water's Wate…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
River basin catchment areas for Melbourne. This layer has two intended purposes: To provide a readily available amalgamation of MWC_Catchments that make up the river basins within Melbourne Water’s ar…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
Eastern Treatment Plant is a wastewater treatment facility. This layer contains the Eastern Treatment Plant Digester Sludge pipeline centre lines and associated details. Includes sewer name, descripti…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
Layer containing line objects delineating hydrological features, representing waterways managed by Melbourne Water (i.e. catchment size is greater than 60 hectares) that have not been significantly mo…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
Eastern Treatment Plant (ETP) is a wastewater treatment facility. Utility water, known as 3W, is generated and used onsite. This layer contains the 3W pipeline centrelines and associated details. Incl…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
Data describes habitat suitability modelling (HSM) results for fish in streams. The data was developed by University of Melbourne through the Melbourne Waterways Research Practice Partnership as part…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
This dataset is a compilation of Frog Census records (citizen science program) and the preceding Frog Watch program for the Port Phillip and Westernport CMA Region. These presence-only records collect…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
Daily observed Storage Dam Volumes at 10 Water Storage Dams operated by Melbourne Water. This data is collected with telemetry devices installed at the storage dams, and verified with field observatio…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
Layer containing water supply main centrelines for other authorities (assets not owned by Melbourne Water). This layer is generated from data received from other Water Authorities (Barwon Water, Gipps…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
Melbourne Water treats effluent to Class A recycled water standard. A proportion of this water is used onsite and provided to retail water companies to sell to recycled water customers. This file cont…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
Polygons representing natural waterway or channel structure locations (such as sediment ponds, litter traps, weirs, spillways, drop structures) and associated details. Includes description, asset sect…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
This layer describes the stormwater priority areas for Melbourne Water’s Healthy Waterways Strategy 2018 (HWS2018). Stormwater priority areas were determined by a combination of decision support tools…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
Catchment area for each Melbourne Water drain. Captured using available contours and drainage network information. This layer has two intended purposes: To enable the identification of the receiving M…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
This data contains points representing drain and waterway outlet locations, associated with a natural waterway or channel centreline, within the Greater Melbourne region. This region includes the Port…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
Layer containing water supply storage dams (location and extent). These are major water supply system storages. Captured using as-constructed drawings and aerial imagery, and includes storage dam name…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
The Eastern Treatment Plant (ETP) discharges treated effluent in accordance with EPA Victoria licence AL74284 to an ocean outfall at Boag Rocks. This file contains hourly flowrate data at the treatmen…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
Eastern Treatment Plant (ETP) is a wastewater treatment facility. This layer contains the ETP supernatant pipeline centrelines and associated details. Includes sewer name, description, asset section (…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
The Eastern Treatment Plant (ETP) receives sewage from the eastern side of Melbourne. This file describes the volume of sewage pumped through ETP on an hourly basis. NOTE. Whilst every effort has been…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
Data describes habitat suitability modelling (HSM) results for platypus. The data was developed by the University of Melbourne through the Melbourne Waterways Research Practice Partnership as part of…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
The Eastern Treatment Plant (ETP) receives sewage from the eastern side of Melbourne. This file describes the quality of the sewage received by providing results of regular sampling. The sample is tak…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
Daily accumulated electricity supply (kWh) and daily accumulated electricity generation (kWh) into the Eastern Treatment Plant (ETP) of Melbourne Water. This data is collected using revenue quality me…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
This layer delineates sewer catchments upstream of retail water company hydraulic information points. Sewer catchments which contribute directly to Melbourne Water assets are also included. This layer…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
Layer containing water main centre lines and associated details. Includes water main name, description, asset section (for As Constructed drawings) and key attributes for water transfer pipes, bypass…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
Layer containing pump sets owned by Melbourne Water and used for water supply. Includes pump station name, description, pump type and other key attributes. This layer is intended to be used to locate…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
Area representing the watershed / hydraulic catchment of major waterways. The "Major Catchment" layer divides each Primary catchment into the tributaries of a primary river. The delineation of a Major…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
Layer containing sewer main centrelines and associated details. Includes sewer name, description, asset section (for As Constructed drawings) and key attributes for gravity mains, pressure (rising) ma…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
Data describes vegetation extent priorities for each stream reach across the Melbourne Water region. Each reach is classified as either high, medium or low priority. To meet the performance objectives…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
As part of the Healthy Waterways Strategy 2018 (HWS2018) the Melbourne Water operating region was split into a series of sub-regions. This includes 5 catchments, and 69 sub-catchments. The boundaries…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
Location and extent of Melbourne Water natural and constructed (man-made) wetlands and lakes. Captured using the Top Water Level (TWL) of each, includes wetland or lake name, asset section (for As Con…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
The Eastern Treatment Plant (ETP) discharges treated effluent in accordance with EPA Victoria licence AL74284 to an ocean outfall at Boag Rocks. This file contains selected discharge quality data. Sam…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
Data describes habitat suitability modelling (HSM) results for macroinvertebrates in streams. The data was developed by University of Melbourne through the Melbourne Waterways Research Practice Partne…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
Layer containing water supply system catchment boundaries for water harvesting in the region of Melbourne. Includes catchment name, type, size of catchment and asset identifier. The type are defined b…
ArcGIS RESTOther
Melbourne Water Open Data Hub · Updated 2026-06-25
Location and extent of Melbourne Water drainage retarding basins. Captured using the Top Water Level (TWL) of each, includes retarding basin name, asset section (for As Constructed drawings) and other…
ArcGIS RESTOther
filter this list in the search
GovAPI Atlas is an index of the APIs and web services that national government open-data portals publish. This edition's list was read from data.gov.au on 2026-10-11 and is refreshed every week. GovAPI Atlas does not host the APIs; you apply for and call them on the portal itself.
What is included
Datasets on data.gov.au with at least one resource that is an API or web service (WMS, WFS, WCS, WMTS, ArcGIS REST, Esri REST, SPARQL, API). File-only datasets are left out.
Source
Source: data.gov.au. Material on data.gov.au is provided under a Creative Commons Attribution 3.0 Australia licence; each dataset lists its own licence.